Hand Drip - Osmotic Flow 3 Pour Method

  • Background

    The Osmotic Flow technique is an innovative coffee brewing method that uses osmosis principles to enhance extraction. It involves a semi-permeable membrane to control water flow through coffee grounds, creating a balanced flavor profile. By meticulously managing the water's interaction with the coffee, this technique maximizes desirable compounds while minimizing over-extraction, resulting in a refined and smooth cup of coffee.

  • Requirements

    Coffee Amount:
    12g for 160ml
    18g for 240ml
    33g for 450ml

    What you need:
    Dripper
    Coffee Beans
    Grinder
    Filter or Filter Paper
    Kettle
    Scale
    Timer

This method involves pouring water in three stages to fully extract the delicious flavors from the coffee beans, using the osmotic flow brewing technique. It may sound complicated, but its quite easy to replicate at home and results in a beautifully clean tasting cup of coffee. View the brewing video guide here or follow the notes below.

 

1. Prepare the Server and Dripper

Set the dripper on the server and preheat it. In this guide, we are using the Origami dripper. Fill the pot with the necessary amount of hot water (enough to fill the server to about 1 cm). Pour the water through the dripper to warm it up.

Swirl the hot water inside the server to ensure the entire surface is warmed up.

If you are using an unbleached paper filter and are concerned about the smell or impurities, set the filter in the dripper and pour hot water through it.

This completes the preheating of the server, dripper, and pot. (Discard the used water.)

how to make the perfect hand drip coffee, coffee dripper

2. Set the Paper Filter in the Dripper and Add Coffee Grounds

Use 12g of coffee for 160ml of water as a guideline for 1 serving. Add the required amount of coffee grounds to the dripper. See other coffee to water ratio guides above.

Once you add the coffee grounds, lightly shake the dripper side to side to level the grounds.

coffee grind size for pourover coffee

3. Blooming (Pre-infusion)

Measure the amount of water needed for each pour.

hand drip brew guide coffee grounds, how to brew hand drip, how to make a pourover coffee, how to brew the perfect coffee

Example for a 140cc cup:

Prepare 160ml of hot water in the pot (92-96°C).

Pour 20g of hot water in a spiral motion starting from the center and moving outwards. Pour slowly and evenly to ensure all the grounds are wet.

If the coffee beans are fresh, they will release gas and bloom.

4. Pouring

  • First Pour (80g): Pour slowly in a spiral motion starting from the center and expanding outwards, drawing circles the size of a 1-yen coin. Pour 80cc and then stop.
  • Second Pour (40g): Once the water level drops to about one-third of the highest pour level, start the second pour. Draw circles the size of a 1-yen coin and pour 40cc, then stop.
  • Third Pour (20g): When the water level drops slightly from the highest pour level, do the final pour. Draw circles the size of a 1-yen coin and pour 20cc. The resulting coffee should be around 70-75°C, with the optimal drinking temperature being around 65-70°C.

Check the grounds after the water has fully drained. If the center is slightly sunken and there is a uniform ring of grounds around the edge, you have successfully brewed your coffee.

hand drip brew guide coffee grounds, how to brew hand drip, how to make a pourover coffee

Additional Notes:

Generally, warm foods are best enjoyed between 60-70°C, while cold foods are best between 5-11°C. For coffee, the optimal aroma is at 71°C and the best flavor is at 68°C.

Related Topics

  • Hand Drip / Pour Over

    Hand Drip / Pour Over

    [Work in progress - updates coming soon!]
  • Espresso & Mokapot

    Espresso & Mokapot (モカポット)

    エスプレッソ発祥の地であるイタリアでは、約100年前からこの抽出方法が採用されています。今では世界中で一般的です。